HF-Regulator II for TL-D lamps

HF-R 136 TL-D EII 220-240V 50/60Hz

HF-Regulator II for TL-D lamps – Dimming: a next step in energy saving

High-frequency electronic dimming ballast, using the analog protocol (1-10 V) for TL-D lamps. The ballast is primarily designed for Indoor application. For outdoor application, the luminaire should be minimum Classland need to be sufficiently protected against water & dust. The installation should also be guard against any lightening surge or any other necessary electrical protection as deemed in such typical installation & application.

Benefits

• The lamp power can be dimmed from 1 to 100% via the Analog control input (in accordance with the 1-10 V industry standard)
• Compliant with European and Asian norms and suitable for emergency lighting systems
• HF operation improves light quality, lamp lifetime
• Combined with controls, additional energy savings can be achieved

Features

• Programmed start: flicker-free ignition < 0.5 seconds and striation-free operation, no stroboscopic effects. Preheating the lamp electrodes enables the lamps to be switched on and off without reducing life
• Smart power ensures constant light, independent of mains fluctuations
• Up to 60% reduction in energy consumption by using automatic lighting control systems
• Stop circuit is activated within 5 seconds in the event of lamp failure (safety stop), and ballast resets automatically after lamp replacement

Applications

• Indoor, general and task lighting applications in combination with lighting control systems (personal control, daylight linking and/or movement detection)