HID ignitors for MK4 semi-parallel systems

Compact ignitors for flexible luminaire design

HID ignitors for semi-parallel systems

Benefits

• Wide range of lamps covered by one ignitor 35-600 W
• Digital versions ensure longer lifetime than series ignitors, and silent operation
• Smaller dimensions than predecessors mean it fits more easily into compact luminaires

Features

• Designed to ensure maximum performance with new MK4 ballasts
• Semi-parallel ignitor will only work in semi-parallel circuits and must be matched with the relevant ballast
• Ignitor equipped with screw terminal blocks as standard
• Lightweight and compact products
• Current flows through ignitor only at lamp start-up

System

• Electromagnetic system requires ballast, ignitor and capacitor
• Designed to work only in semi-parallel circuits: if ballasts with “L” in their description (e.g. BSN 100 L307…) are used, SN(D)… ignitors are required; if ballasts with “K” in their description (e.g. BSN 100 K307…) are used, SK(D)… ignitors are required. Capacitor value to match system power can be found on lamp/ballast combination sheet
• No ignitor needed for SON-I lamps

Applications

• Outdoor lighting

ComboCC Gen 4.0

Combo charge controllers Gen 4.0

Combo CC Gen 4.0 is most comprehensive range of solar charge controllers suitable for solar lighting in major, intermediate and minor roads in off-grid and hybrid applications. High system efficacy, optimised design and long life ensures lower cost of ownership. Configurable and easy to operate with remote monitoring and control ready.

Benefits

• Three different platforms: 200 Wp, 400 Wp and 600 Wp.
• Available in off-grid and hybrid options.
• Can drive luminaires from 5,000 to 24,000 lumens for a wide range of autonomy days and solar insolation.
• Integrated LED driver enables system efficacy up to 170 lumens/W.
• Integrated protection and control modules.
• Onsite programming and configuration with GUI for panel, battery and dimming profile.
• Metal weatherproof housing with several layer of protections.

Features

• Compatible with Gen 4.0 solar luminaires (BRP38x/39x)
• Off-grid and hybrid options available
• Battery type/voltage/capacity, LED wattage, dimming steps, PV panel capacity are configurable.
• IP65 housing with IP67 connectors, RH 95{b9c3e1decd1d9a6381545d5ae59cfbfb6f66ae08352fb0d9f4b009db789225db}
• IEC62109-1, IEC61547, CISPR15, IEC62093, IEC61347-2-13, EN50530, IEC62384

Applications

• Non-integral Gen 4.0 solar street light range

Gear for SDW-T lamps

CSLS 100 SDW-T 220-240V 50/60Hz

CSLS electronic control unit with impregnated (HID ‘BASIC’ ) or encapsulated (HID ‘Heavy Duty’ ) electromagnetic ballasts

Benefits

• Electronic control unit ensures reliable starting and stabilizes lamp power for optimum performance (minimum color deviation)
• Simple installation and cabling

Features

• Ballasts and electronic control units equipped with screw terminal blocks; other contact possibilities for
• Earthing-while-mounting facility (HID ‘BASIC’ ballasts), separate earth terminal (HID ‘Heavy Duty’)

Applications

• Similar to those of the related lamps

Warning & Safety

• Climatic suitability CSLS and HID BASIC: restricted to built in situations under normal conditions
• Climatic suitability CSLS and HID Heavy Duty: use in luminaires under humid conditions (not drip-proof)

Indoor Accessories

Indoor lighting control accessories cover all the user interfaces, sensors, cables, dimmers and other accessories that can be used with our control systems or stand-alone with our lighting systems.The performance and capabilities of the products vary according to the system they are connected to.

Philips Cabinet Controls

LFC7510 AmpLight Current

Controller platform to address remote group light management for diverse outdoor lighting applications. Cost effective Telmanagement, with remote control of outdoor lighting on highways, roads, streets and in residential areas. Saves energy by enabling a group of light points to be switched on or off at any given time or set to pre-determined dimming level. Makes outdoor lighting installations intelligent and dynamic, minimizing light pollution and increasing safety

Applications

• Motorways, roads
• Residential areas
• Street lighting in general

Philips OccuSwitch

The OccuSwitch is a movement detector with a built-in switch. It will switch the lights off in a room or area when it is vacated and thus save up to 30{b9c3e1decd1d9a6381545d5ae59cfbfb6f66ae08352fb0d9f4b009db789225db} on electricity The OccuSwitch can switch any load of up to 6 A and control an area of between 20 and 25 m2. A detachable mains connector enables easy installation and mounting of the OccuSwitch in the ceiling, a separate Wieland cable is available for easy, fast and trouble-free installation.

Benefits

• Energy savings of up to 30{b9c3e1decd1d9a6381545d5ae59cfbfb6f66ae08352fb0d9f4b009db789225db} and good pay-back
• Easy to install, enables even faster installation by optional Wieland connectors
• Works with almost all lamp- and luminary types

Features

• OccuSwitch has a smart timer that will extend the delay time by 10 minutes if movement is detected shortly after switch-off, assuming that the area is still in use but there is very little movement
• The OccuSwitch has a retractable shield that can be used to shield off areas, e.g. corridors, adjacent to the area the OccuSwitch is controlling

Applications

• The OccuSwitch is designed for use in offices, schools and similar applications, including toilets, storage rooms, etc
• The surface box also enables surface mounting, with either recessed wiring or surface-mounted ducts
• It is optimized for recessed ceiling mounting and for mounting heights between 2.5 and 4 meters

Dynalite Multipurpose Controllers

Within any project, many different lighting load types may be required to achieve a desired result. Each of these load types may require a different style of control. The Dynalite range of multipurpose controllers allows customization of output types via different output module units. When using DIN-rail multipurpose controllers, a specific type of control can be chosen for each circuit: relay, leading-edge dimmer, trailing-edge dimmer, driver control, controller with out-of-the-box functionality, fan control, and blind/screen control.In any combination, multiple load types can be controlled from a single device. This simplifies installation and prevents wasted capacity of circuits that are not required.

Benefits

• Controllers support distributed intelligence, i.e. each device has a CPU with presets and can act as a stand-alone control unit
• Simplified network messages and commissioning process
• Some devices have out-of-the-box functionality with re-configuration capability

Applications

• Retail and Hospitality, Office and Industry
• Residential
• Public spaces, Stadiums and multi-purpose Event Centers

Dynalite Network Devices

Sophisticated yet simple energy-efficient lighting control solutions. To bring all the different devices together, Dynalite supports a range of network devices that are useful in creating a problem-free installation.

Applications

• Retail and Hospitality, Office and Industry
• Residential
• Public spaces, Stadiums and multi-purpose Event Centers

Philips Smart Track

Designed for operation in conjunction with the Smart Spot projector range, Smart Track is a one-phase track with enhanced earthing to ensure safety. This reliable and flexible solution offers a choice of colors, lengths and different-shaped couplers in order to meet challenging applications.

Benefits
• Extra safe: no worries about safety
• Durable: long life and high reliability
• Flexible: users can mix and match components as required

Features
• Safety protection
• Lifetime and reliability rigorously tested
• Three colors, two lengths, three connecting couplers

Applications
• Shopping areas
• Art galleries

Philips EnduraLED Bulkhead

EnduraLED Bulkhead luminaire is a sustainable and reliable offering for indoor or semi-outdoor public area with IP66 ingress protection. The product offers two lumen packs with two different CCT’s and suitable for verstalile applications such as staircases, industrial areas, circulation areas, lift wells etc. Pressure die cast housing and high imapact resistance polycarbonate cover make this bulkhead maintenance free solution for heavy duty industries.

Benefits
• Sturdy design that combines well with industrial applications
• Higher life class with minimal maintenacne
• Best in class efficacy ensures lower ROI
• Easy installation with standard tools
• Ensures visual comfort and reduces eye strain through diffused natural lighting

Features
• High ingress protection-IP66
• Impact resistant-IK09
• Compact integral design
• Color temperature – 4000K / 6500K and Lumen packs – 700 lm /1100 lm
• Pressure diecast housing with robust polycarbonate cover
• External mounting through simple tools
• Long lifetime: 50000 Hrs.

Applications
• Lift wells
• Heavy duty industries
• Indoor circulation areas
• Balconies and terraces semi outdoor area
• Government buildings

Warning & Safety
• Meant for Indoor Industrial Application Only.