Posted on: August 18, 2022
HID-HeavyDuty BHL for HPL/HPI
BHL 250 L40-A2 230V 50Hz HD2-126
Long-lasting, reliable solution
Encapsulated electromagnetic copper/iron ballasts for HPL, HPI (Plus) and SON-H lamps
Benefits
- Excellent resistance to chemical impact, humid conditions and environmental stress crack
- Long-lasting reliable solution – outstanding product lifetime of 15 years average
- Minimal watt losses thanks to orthocyclic winding process
- Control gear can be installed remotely
Features
- Encapsulated with thermoplastic polyester resin, reinforced with glass fiber
- Ballasts designed for mercury lamps (HPL) without using an ignitor can also be used with HPI lamps together with an ignitor
- Equipped with screw terminal blocks as standard; insert contacts available upon request
- Ballasts for alternative mains voltages/frequencies available upon request
- Separate earth terminal (HID ‘Heavy Duty’)
System
- Electromagnetic system requires ballast, ignitor and capacitor
- Mercury lamps (HPL) ? no ignitor needed. Capacitor value to match system power can be found on lamp/ballast combination sheet
- Metal-halide lamps (HPI) to be used with SI51 ignitor. Capacitor value to match system power can be found on lamp/ballast combination sheet
Application
Posted on: August 16, 2022
HID-Constant wattage BSX for SOX
BSX 180 H96 220-240V 50Hz CW-178/78
Long-lasting, reliable solution
Constant-wattage (potted) electromagnetic copper/iron ballasts for use with an external ignitor for SOX and SOX-E lamps
Benefits
- Excellent resistance to humid conditions
- Long-lasting reliable solution – outstanding product lifetime of 15 years average
- Minimal watt losses thanks to orthocyclic winding process
- Control gear can be installed remotely
Features
- Series capacitor required in circuits with constant wattage
- Silicon potted ballast under IP21 canopy
- Equipped with screw terminal blocks as standard
- Ballasts for alternative mains voltages/frequencies available upon request
System
- Electromagnetic system requires ballast, ignitor and capacitor
- To be used with relevant SX.. ignitor
- Capacitor value to match system power can be found on lamp/ballast combination sheet
- Climatic suitability: restricted to built-in situations where relative humidity is limited
Application
Posted on: August 15, 2022
Philips PrimaVision BasePerform
HID-PV Base HID-PV Base 50 SON C3 220-240V
The ideal alternative to magnetic drivers
Highly reliable electronic drivers for SON and CDO lamps designed to save energy thanks to better light efficiency compared to magnetic drivers, and to save on maintenance costs thanks to a lifetime of up to 50,000 hours.
Benefits
- Focused on best operation with SON and CDO lamps – can function for up to 6 years without maintenance cost
- Competitive pricing – similar to magnetic system (ballast + ignitor + capacitor)
- Same number of drivers per MCB as electromagnetic ballasts
Features
- Lifetime of 50,000 hours, 3-year warranty
- Future-proof solution [A2-compliant] designed to compete with electromagnetic systems
- Wide temperature range: -30 to + 55 °C
Applications
- Roads
- Urban Streets
- Parks
Posted on: August 14, 2022
SmartBright Direct lit Panel TW G2
SmartBright Direct lit Panel G2 – Trusted performance. Everyday.
The SmartBright range contains a selection of popular LED luminaires that comes with the high Philips quality levels at a competitive price. Reliable, energy efficient and affordable – just what you need.
Benefits
- Philips quality and reliability
- Visual comfort
- Energy saving
Features
- 30000 hr life, 3 Years warranty
- Flicker Free, Ripple less than 5%
- Class II, IP20/IK02
- CRI80
- Surge protection: 1KV/2KV
Applications
- Office
- Hospitality
- Retail
Posted on: August 12, 2022
PrimaVision for CDM Elite MW
HID-PV 315 /S CDM 220-240V 50/60Hz
Highly reliable drivers for medium-wattage lamps
Highly reliable electronic drivers for medium-wattage lamps: 80,000 hours lifetime for the Xtreme version and 50,000 hours for the non-Xtreme versions
Benefits
- Most efficient white-light system in the industry in its power range
- Minimized maintenance costs for outdoor lighting thanks to very long lifetime
- Same energy consumption and smooth driving of the lamp regardless of fluctuations in mains voltage
Features
- Up to 92% system efficiency
- PrimaVision Xtreme 210W CDM lifetime: 80,000 hours (90% survival Tc = 80 °C)
- PrimaVision Xtreme 210W CDM: 5 kA/10 kV lightning strike protection
- PrimaVision 315W CDM: lifetime 50,000 hours
System
- Designed for optimum system performance with Philips MASTERColour CDM Elite lamps
Applications
- High-bay shop lighting
- Flood and area lighting
- Road lighting and petrol stations
- Offices and industry
Posted on: August 11, 2022
DynaVision Programmable Xtreme for CDMe
HID-DV PROG Xt 210 CDMe/CPO C2 208-277V
Xtreme drivers for maximum energy savings
Highly reliable and flexible electronic drivers for MASTERColour CDMe MW lamps; designed to save on energy costs via integrated controls and to reduce maintenance costs thanks to 80,000 hour lifetime and integrated lightning protection. The DynaVision Programmable product family is the perfect basis for any sort of lighting management solution.
Benefits
- Most efficient white-light system in the industry in its power range
- Designed to minimize maintenance cost in outdoor lighting
- No down-time due to calamities (storms, lightning strikes, etc.)
- Same energy consumption and smooth driving of the lamp regardless of fluctuations in the mains voltage
Features
- Programmable by means of standard digital interface (DALI) and controllable via DALI protocol
- Integrates control options (DynaDimmer)
- Longest lifetime for electronic driver: 80,000 hours with minimum 90% survival at Tc = 80 °C
- Lightning protection 10 kV/5 kA
- Accurate lamp power stabilization of 95-97% over wide mains-voltage range of 180-300 V
Applications
- High-bay retail
- Floodlighting
- Area and road lighting
- Offices and industry
Posted on: August 9, 2022
PrimaVision Xtreme for SON
PV Xt Q 70W SON
Xtreme drivers for the highest reliability
Highly reliable electronic drivers for SON lamps designed for saving energy via better light efficiency compared to magnetic drivers and for saving on maintenance costs thanks to a lifetime of up to 80.000 hours and the integrated Lightning protection.
Benefits
- Up to 15% energy saving due to the high driver efficiency (92%) and better wattage control at overvoltage (when compared to magnetic ballasts)
- Minimizes maintenance cost due to the Xtreme lifetime of 80.000 hours and the integrated lightning protection
- Better light quality as the PrimaVision Xtreme gears enable perfect output uniformity across the lighting network and solve the flickering effect (created by magnetic ballasts)
Features
- Xtreme long lifetime of 80.000 hours with minimum 90% survival at a case temperature of 80 °C
- Xtreme lightning protection (10 kV)
- Xtreme protection against humidity and vibration
- Better lighting efficiency compared to magnetic ballasts
- Accurate lamp power stabilization of 95-97 % over wide mains voltage range of 180-300 V
Applications
- Residential lighting
- City beautification
- Road and highway lighting
Posted on: August 7, 2022
PrimaVision Economy for CPO
CertaVision CPO140
Economy drivers – reliable and energy-efficient products for outdoor lighting
Highly reliable electronic drivers for CPO lamps; the drivers are designed for outdoor use and consume less energy than conventional alternatives.
Benefits
- When used together with the CPO lamp, the driver creates the most efficient white-light system available in the industry in its power range
- Up to 15% energy saving thanks to high driver efficiency (92%) and better wattage control at overvoltage (compared with magnetic ballasts)
- Unlike in many magnetic systems, where different elements fail at times, these driversare so reliable that they do not require any attention whatsoever
Features
- Long lifetime of 60,000 hours, with minimum 90% survival at Tc = 80 °C
- Surge protection of 4 kV/2 kA
- Protection against humidity and vibration
- Improved efficiency compared with magnetic ballasts
Applications
- Residential lighting
- City beautification
- Road/highway lighting
Posted on: August 3, 2022
HID-Basic BSN/BMH MK4 semi-parallel for SON/CDO/CDM/MH/HPI
BSN 400 K407-A2-ITS 230/240V 50Hz BC3
Long-lasting, reliable solution
Impregnated electromagnetic copper ballasts for use with an external semi-parallel ignitor for CDM, CDO, MH, HPI (Plus) and SON lamps
Benefits
- System design: one ignitor SKD578 can trigger all lamps from 35 to 600 W
- Long-lasting reliable solution protected from overheating; better for hot environments than its predecessors; extended warranty
- Minimal watt losses thanks to orthocyclic winding process
Features
- Improved thermal features – much cooler ballast
- All ballasts are equipped with ThermoSwitch for protection against end-of-lamp-life phenomena
- Ballast can also be used in combination with series (superimposed) ignitor
- Equipped with screw terminal blocks as standard; insert contacts available upon request
- Ballasts for alternative mains voltages/frequencies available upon request
System
- Electromagnetic system requires ballast, ignitor and capacitor
- Semi-parallel circuit: if ballasts with “L” in their description (e.g. BSN 100 L307…) are used, SN(D)… ignitors are required; if ballasts with “K” in their description (e.g. BSN 100 K307…) are used, SK(D)… ignitors are required. Capacitor value to match system power can be found on lamp/ballast combination sheet.
- Series circuit: all ballasts are designed to work with series ignitors
- No ignitor needed for SON-I lamps
Applications
- Outdoor lighting
- Horticulture
Posted on: August 2, 2022
HID Ignitors for Series Systems
SI 54 380-415V 50/60Hz
Digital ignitors for maximum reliability
HID ignitors for series systems
Benefits
- Easy installation and wiring
- Can operate with both semi-parallel and series ballasts
- Digital ignitors ensure maximum reliability
Features
- Ignitors equipped with screw terminal blocks as standard
- Series ignitor will only work in series circuits
System
- Electromagnetic system requires ballast, ignitor and capacitor
- Designed to work only in series circuits
- No ignitor needed for SON-I lamps
Applications
- Outdoor lighting (most popular application: road and tunnel lighting)