HF-Basic II for TL-D lamps

HF-B 136/236 TL-D EII 220-240V 50/60Hz

Affordable, reliable, CE complying, high frequency electronic ballast for TLD fluorescent lamps Ideal alternative for electromagnetic (EM) ballasts

Benefits

• Savings of 25% energy compared to electromagnetic “C-type” ballasts
• Instant start gives “direct” light
• HF-operation eliminates eye strain as caused by electromagnetic ballasts
• No igniter/capacitor needed, simplified wiring compared to Electromagnetic Solutions
• The HF-B TLD range has a robust design and meets internal safety, EMC and Immunity tests
• Offers the flexibility for simple wiring release possibility
• Including safety approbation via an external test-house covering IEC/EN 61347
• Automatic restart (after voltage dip or lamp exchange) ensures easy operation and hassle free re-lamping

Features

• Energy efficient CELMA EEI = A2
• Complying to CE, VDE-EMC, and ENEC
• 000 hour lifetime at 75°C (Tc max) and >4.000 on/off switches on one lamp
• Active power factor correction, smart power
• Instant start, flicker-free start
• High power factor >0.96 with THD <15%
• Required battery voltage for guaranteed ignition 198 – 254 V
• Required battery voltage for burning lamps 176 – 254 V
• Nominal light output is obtained at the DC voltage of 220 – 240 V
• EMC compliant to EN 55015 2006 + A1 2007
• Universal connector WAGO 251

Applications

• Designed for applications where lamps burn for a long period of time and switching cycle (on/off) is infrequent (e.g. maximum 3 times a day)
• Ideal for installations such as department stores, airports, offices
• Suitable for high risk or explosive areas

HF-Essential for TL5/TL-D

HF-E 118 TL-D 220-240 50/60Hz

HF-Essential for TL5/TL-D

Essentially smart and reliable. HF-Essential is the most cost-effective, slim and affordable ballast to reliably operate a fluorescent lamp. It is also the ideal entry-level product for EM system users who want to enjoy the benefits offered by electronic ballasts. The cost-saving and reliable HF-Essential has an energy efficiency class A2, and its robust design meets all relevant international safety and performance standards. HF- Essential is intended for use with indoor lighting fixtures such as recessed luminaires, which are largely used in office, industrial, hotel, restaurant and other applications. The ballast is primarily designed for Indoor application. For outdoor application, the luminaire should be minimum Clasland need to be sufficiently protected against water & dust. The installation should also be guard against any lightening surge or any other necessary electrical protection as deemed in such typical installation & application.

Benefits

• Automatic restart (after voltage dip or lamp replacement) ensures easy operation and hassle-free re-lamping
• DC emergency operation and EMC compliant to EN 55015 2006 + A1 2007
• Suitable for luminaires in protection class I and, after testing, class II

Features

• Complies with CE and Kema
• Robust design for 45,000 hours lifetime at Ta=50 ˚C and over 6,000 on/off switching operations on one lamp
• Energy efficiency class: A2
• Failure rate of 0.3% per 1,000 hours at Tc max = 75 °C
• Igniter and capacitor not required; flicker-free and noiseless

Applications

• Ideal for applications where there is a need to reduce the wattage per square meter or to reduce operating costs
• Indoor applications such as office buildings, hospitals, supermarkets, department stores, homes and schools

HF-Regulator II for PL-T/C

HF-R 2 26-42 PL-T/C EII 220-240V 50/60Hz

HF-Regulator II for PL-T/C – Dimming: a next step in energy saving

Compact, high-frequency electronic dimming ballast, using the analog protocol (1-10 V) for PL-T, PL-C and PL-R lamps. The ballast is primarily designed for Indoor application. For outdoor application, the luminaire should be minimum Classland need to be sufficiently protected against water & dust. The installation should also be guard against any lightening surge or any other necessary electrical protection as deemed in such typical installation & application.

Benefits

• The lamp power can be dimmed from 1 to 100% via the Analog control input (in accordance with the 1-10 V industry standard)
• Compliant with European and Asian norms and suitable for emergency lighting systems
• HF operation improves light quality, lamp lifetime
• Combined with controls, additional energy savings can be achieved

Features

• Programmed start: flicker-free ignition < 0.5 seconds and striation-free operation, no stroboscopic effects. Preheating the lamp electrodes enables the lamps to be switched on and off without reducing life
• Smart power ensures constant light, independent of mains fluctuations
• Up to 60% reduction in energy consumption by using automatic lighting control systems
• Stop circuit is activated within 5 seconds in the event of lamp failure (safety stop), and ballast resets automatically after lamp replacement

Applications

• Indoor, general and task lighting applications in combination with lighting control systems (personal control, daylight linking and/or movement detection)

Philips Smartbright Pro Downlight

DN068B LED4/840 PSU GM

Full Wattage Range, Full CCT Range, Recessed Installation

The SmartBright Pro Downlight comes offering reliable lighting performance with recessed installation, suitable for diversified applications. Full wattage ranges from 5W to 24W, full CCT range covering 3000K, 35000K, 4000K and 6500K, eye comfort experience with low flicker lighting can attract you more with its elegant design.

Benefits

• Recessed Installation
• Elegant look & feel
• Eye comfort experience with low flicker lighting

Features

• Power: 5W, 9W, 12W, 15W, 18W and 24W
• 4 CCT: 3000K, 3500K, 4000K and 6500K
• Input voltage is 220-240V
• CRI80
• Efficacy: up to 110lm/W
• Working temperature: -20℃ to +40℃

Applications

• Residential
• Hospitality
• Retail
• Shopping mall
• Hotels

Philips Varilume LED Downlight

DN031B LED6/827 PSR-E D90 NZ

The professional step dim LED downlight

Varilume LED downlight provides three lighting scenes with different brightness for different occasions. It offers significant energy savings and long lifetime with superior light quality

Benefits

• Significant energy saving
• Superior light quality
• Long lifetime

Features

• Highly energy-efficient
• Great color rendering – CRI 90
• Long lifetime

Applications

• Home application
• Corridors & stairways

Philips CoreView G4 RC420B

RC420V G4 LED38/840 W30L120 PSU

A full indirect light troffer

RC420B G4 inherits the elegant and classic indirect light design from previous generation but with slimmer outlook. It offers 3 types, 600×600,300×1200, and 600×1200 (Customized offer) mm with max: 108lm/w. Air slot option applies to 600x1200mm type to give fast and easy support to the projects where air outlet is required from the office lighting fittings. Full indirect light design provides visual comfort in the office area as well.

Benefits

• Full range offer from 600×600, 300×1200 to 600×1200(Customized offer) to cover key applications
• High system efficacy from indirect light design to provide additional energy saving
• Dali, Tunable white, Interact Office options are available for total system offer
• Slim design for critical office space installation

Features

• System efficiency 108lm/W(max)
• CRI80 and CRI90 (with customized solution)
• Max height <=90mm (without driver)
• Lifetime: 50K hours (L70@25deg)

Applications

• Open plan office
• Public indoor area
• Meeting/Training room

HF-Performer III for PL-T/C lamps

HF-P 1/218 PL-T/C III 220-240V

An energy-efficient solution

HF-Performer III PL-T/C is a sustainable, slim and high-frequency electronic ballast for PL-T and PL-C fluorescent lamps. It is ideal for applications where high energy efficiency is required. The HF-Performer III range has a robust design, meets all relevant international safety and performance standards and is energy efficient (CELMA EEI A2). The ballast is primarily designed for Indoor application. For outdoor application, the luminaire should be minimum ClassⅠand need to be sufficiently protected against water & dust. The installation should also be guard against any lightening surge or any other necessary electrical protection as deemed in such typical installation & application.

Benefits

• Robust design that meets all relevant international safety and performance standards, in combination with good energy efficiency
• Automatic restart (after voltage dip or lamp exchange) ensures easy operation and hassle-free re-lamping.
• Suitable for DC emergency operation, 186 to 275 V (at -10 °C) and in line with IEC/EN 60598-2-22 luminaire norms

Features

• 50,000-hour lifetime at maximum case temperature, combined with over 60,000 on/off switches on one lamp
• Programmed, flicker-free, pre-heated start (< 2.0 s) which allows the lamp to be switched on and off without reducing useful lamp life
• Active power factor correction to ensure constant light, irrespective of mains-voltage fluctuations
• The unit is protected against excessive mains voltage and incorrect connections.

Applications

• Ideal for commercial indoor lighting applications where it is necessary to reduce the wattage per square meter or operating costs
• Used with movement-detection control systems like Philips OccuPlus
• Mainly for indoor applications such as spotlights, downlights and recessed fixtures used primarily in retail stores, office buildings, supermarkets, hotels and convenience stores
• Industrial premises with long operating hours

Philips MSR Platinum (Touring/Stage)

MSR Platinum 35 1CT

MSR Platinum 35 – enhanced stage lighting

oday’s stage designs call for lighting solutions which deliver high brightness and high-contrast beams to avoid shadow creation, as well as more compact luminaire and fixture designs to improve creative choice and design flexibility. Addressing this need, we have developed an incredibly powerful, brilliant and lightweight, compact system for the most amazing light experience – MSR Platinum 35. This lamp system provides a powerful and innovative tool to create intense lighting and delivers the same good light quality as other MSR lamps. The exceptionally short arc generates sparkling, bright light and this ultra-compact design makes the lamp suitable for smaller stage lighting fixtures.

Benefits

• High beam intensity, high brightness
• Freedom to create smaller and lighter fixtures
• High perceived brightness
• Easy and fast lamp replacement
• A long and reliable lifetime

Features

• Very short arc
• Compact system
• High Correlated color temperature
• Philips FastFit technology
• Philips Platinum technology

Applications

• Events
• Shows/Theater
• Touring/Stage

Warning & Safety

• A lamp breaking is extremely unlikely to have any impact on your health. If a lamp breaks, ventilate the room for 30 minutes and remove the parts, preferably with gloves. Put them in a sealed plastic bag and take it to your local waste facilities for recycling. Do not use a vacuum cleaner.

MASTERColour CDM MW Eco

MASTERColour MW eco MASTERColour CDM-TMW eco 230W/842 E40

Direct retrofit with immediate energy savings for quartz metal halide

Ceramic metal halide lamps with clear tubular or coated ellipsoid outer bulb, tailor-made to replace and outperform quartz metal halide lamps on existing gear.

Benefits

• Direct retrofit for various quartz metal halide lamps, operates on existing control gear (Mercury and HPS)
• Lowest total cost of ownership when relamping due to energy savings and long service life as a result of high lumen maintenance

Features

• Proven Philips ceramic technology (CDM) offering
• High efficacy for energy savings and more initial light
• Excellent lumen maintenance resulting in long service life
• Enhanced spectrum Xtreme grow lamp offers 22% more micromols.*
• Excellent color rendering, meeting EN1246-1

Applications

• Sports lighting, floodlighting of buildings and monuments, area lighting e.g. harbors and building sites, canopy lighting e.g. petrol stations
• High-bay lighting e.g. industrial workshops, exhibition halls, hypermarkets, shopping malls, DIY stores, churches, airports and train stations

Warning & Safety

• For use with control gear designed for high pressure mercury or high-pressure sodium lamps with external ignitor
• A lamp breaking is extremely unlikely to have an impact on your health. If a lamp breaks, ventilate the room for 30 minutes and remove the parts, preferably with gloves. Put them in a sealed plastic bag and take it to your local waste facilities for recycling. Do not use a vacuum cleaner.
• Warm restart time can be up to 15 minutes; T15 ignitors therefore advised.

MasterColor CDM ED17 Protected Elite 4200K

MHC50/U/MP/4K ELITE

Unrivaled performance, familiar shape

MasterColor Elite Protected Ceramic Metal Halide ED-17 4200K Lamps provide excellend lumen maintenance and outstanding performance over time in a protected lamp.

Benefits

• Excellent color – Up to 93 CRI (color rendering index)
• Color stability over life within +/- 200 K
• Lamp to lamp color consistency over life
• High lamp efficacy
• Elite 50W lamp provides 29% more initial lumens as compared to a standard MasterColor Protected CMH ED-17 50W lamp*
• Elite 50W lamp provided 52% more mean lumens as compared to a standard MasterColor Protected CMH ED-17 50W lamp+
• + Philips MasterColor Elite Protected CMH ED-17 4200K 50W Lamps provide 3716 mean lumens compared to MasterColor Protected ED-17 50W lamp at 2450 mean lumens.
• * Philips MasterColor Elite Protected CMH ED-17 4200K 50W Lamps provide 4645 initial lumnes compared to MasterColor Protected ED-17 50W lamp at 3600 iniitial lumens.

Features

• Application versatility
• Universal operating position
• Suitable for use in open fixtures
• Dimension, base and light center length are same as standard MasterColor ED-17 lamps
• Available in 50W, 70 W and 100W Elite lamps

Applications

• Ideal for general lighting,downlighting,and flood lighting.

Warning & Safety

• R “WARNING: These lamps can cause serious skin burn and eye inflammation from short wave ultraviolet radiation if outer envelope ot the lamp is broken or puntured. Do not use where people will remain for more than a few minutes unless adequate shielding or other safety precuations are used. Certain lamps that will automaticallly extinguish when the outer envelope is broken or punctured are commercially available.” This lamp complies with FDA radiation performance standard 21 CFR subchapter J. (USA:21 CFR 1040.30 Canada: SOR/DORS/80-381)
• WARNING: The arc-tube of metal halide lamps are designed to operate under high pressure and at temperatures up to 1000ºC and can unexpectedly rupture due to internal or external factors such as a ballast failure or misapplication. If the arc-tube ruptures for any reason, the outer bulb may break and pieces of extremely hot glass might be discharged into the surrounding environment. If such a rupture were to happen, THERE IS A RISK OF PERSONAL INJURY, PROPERTY DAMAGE, BURNS AND FIRE. These lamps are designed to retain all the glass particles, should an arc tube rapture occur. The following operating instructions are recommended to minimize the occurrences.
• The arc-tube of metal halide lamps are designed to operate under high pressure and at temperatures up to 1000ºC and can unexpectedly rupture due to internal or external factors such as a ballast failure or misapplication. If the arc-tube ruptures for any reason, the outer bulb may break and pieces of extremely hot glass might be discharged into the surrounding environment. If such a rupture were to happen, THERE IS A RISK OF PERSONAL INJURY, PROPERTY DAMAGE, BURNS AND FIRE. These lamps are designed to retain all the glass particles, should an arc tube rapture occur. The following operating instructions are recommended to minimize the occurrences.
• RELAMP FIXTURES AT OR BEFORE THE END OF RATED LIFE. Allowing lamps to operate until they fail is not advised and may increase the possibility of inner arc tube rupture.